Rear Carrier (Aluminum) 24V Battery
Model No. KL24HS95S
Voltage 24V
Normal Capacity 11Ah-17.5Ah
Configuration 7S5P
Inner Resistance <200mΩ
Charge Voltage Limit 29.75V
Continuous Discharge Current 15A
10min Discharge Current 18A
5sec Discharge Current 35A
Size 151.00 x 53.00 x 365.00 mm
Weight 2500g
Operate Temp. Charge 0~45°C
Operate Temp. Discharge -20~60°C
Storage Temp. -20~40°C
Cycle Life 500Times
PCB Safety Functions Over-charge
Secondary protection
Over-current protection
Cell balancing
Temperature protection
1. 4-Level LED indicator
2 15A Fuse
3 Handlebar
4 Battery contact socket
5 Charging input jack
6 Power on/off
7 Connecting cable
Safety Devices
  • - Water-resistant, non-flammable and durable ABS plastic top cap.
  • - Built-in PCB protection: preventing short circuit, over-current, over-heat, over-charge, over-discharge.
  • - The internal pack is stabilized by braces: avoiding mechanical accidents caused by vibration.
The Four-level LED indicates current power status. The 15A fuse, serves as a second protection device, can prevent the battery pack from excessive discharge.
It is easy to hold the battery with the well designed handlebar. Battery could be recharged either by fastening on the bike or by itself with the provided AC adapter.
The power on/off button is set on the battery base. Not much space is needed to install the portable battery into the rear carrier.
With built-in fuel gauge in the battery,battery performance and more information could be shown on the connected LCD instrument panel. Battery information can be viewed on computer through the connection of data collector.
Sent message to eRider
QQ: 2488650140
Sent message to eRider
QQ: 503799675
Tel: 13823273345
Sent message to eRider
QQ: 1929985156
Tel: 13510091591
Sent message to eRider
QQ: 895535213
Tel: 13807421593