Rear Carrier (Plastic) 36V Battery
|Charge Voltage Limit||42.5V|
|Continuous Discharge Current||10A|
|10min Discharge Current||15A|
|5sec Discharge Current||18A|
|Size||317.20 x 148.00 x 56.30 mm|
|Operate Temp. Charge||0~45°C|
|Operate Temp. Discharge||-20~60°C|
|PCB Safety Functions||Over-charge
|3||4-Level LED indicator|
|4||Charging input jack|
- - Water-resistant, non-flammable and durable ABS plastic top cap.
- - Built-in PCB protection: preventing short circuit, over-current, over-heat, over-charge, over-discharge.
- - The internal pack is stabilized by braces: avoiding mechanical accidents caused by vibration.
|The 15A fuse acts as the second protection to prevent excessive current conducted through the battery pack.||The LED light on power button will turn red when power is on, and be no color when it is off.|
|With 4 level LED indicator to show current battery power status.||The battery can be recharging either with the bike, or, separated from bike, with the supplied AC adapter.|
|When the battery is unlocked, it can be taken out easily from the battery cover.||With the key lock to lock up the battery pack steadily inside the battery cover.|
|There are screw holes at the bottom of the battery cover for assembling.||With built-in fuel gauge in the battery, battery performance and more information could be shown on the connected LCD instrument panel|
|Battery information can be viewed on computer through the connection of data collector|