Multi-fit 24V Battery
|Normal Capacity||8.8Ah - 14.0Ah|
|Inner Resistance||≤ 200mΩ|
|Charge Voltage Limit||29.75V|
|Continuous Discharge Current||15A|
|10min Discharge Current||18A|
|5sec Discharge Current||35A|
|Size||175.00 x 110.00 x 75.00 mm|
|Operate Temp. Charge||0~45°C|
|Operate Temp. Discharge||-20~60°C|
|PCB Safety Functions||Over-charge
|1||4-Level LED indicator|
|5||Battery contact socket|
|6||Charging input jack|
- - Water-resistant, non-flammable and durable ABS plastic top cap.
- - Built-in PCB protection: preventing short circuit, over-current, over-heat, over-charge, over-discharge.
- - The internal pack is stabilized by braces: avoiding mechanical accidents caused by vibration.
|Battery could be installed and removed easily by using the easy-carrying handlebar.||The Four-level LED indicates current power status.|
|The LED (at the power button controls on/off of the battery) glows when power is on.||The 15A fuse, serves as a second protection device, can prevent the battery pack from excessive discharge.|
|Battery can be recharged either by fastening on the bike or by itself with the provided AC adapter.||The key lock is used to fix the battery onto the holder.|
|Battery holder can be welded on the bike vertically or horizontally. The Contact of KF541.150 is also adjustable in order to enhance the flexibility of battery installation.||KF542.150, the fixed holder, is designed for multi-direction installation. User can change the position of battery (vertically / horizontally) by adjusting the clamp.|
|Battery can be installed easily. Simply slide the battery towards the holder by following the track.|