Rear Carrier (Plastic) 36V Battery
Model No. KL36HS92B
Voltage 36V
Normal Capacity 8.8Ah - 14.0Ah
Configuration 10S4P
Inner Resistance ≤75mΩ
Charge Voltage Limit 42.5V
Continuous Discharge Current 15A
10min Discharge Current 18A
5sec Discharge Current 35A
Size 321.00 x 148.00 x 56.00 mm
Weight 2416g
Operate Temp. Charge 0~45°C
Operate Temp. Discharge -20~60°C
Storage Temp. -20~40°C
Cycle Life 500Times
PCB Safety Functions Over-charge
Secondary protection
Over-current protection
Cell balancing
Temperature protection
1 Key lock
2 15A Fuse
3 4-Level LED indicator
4 Charging input jack
5 Power on/off
Safety Devices
  • - Water-resistant, non-flammable and durable ABS plastic top cap.
  • - Built-in PCB protection: preventing short circuit, over-current, over-heat, over-charge, over-discharge.
  • - The internal pack is stabilized by braces: avoiding mechanical accidents caused by vibration.
The 15A fuse acts as the second protection to prevent excessive current conducted through the battery pack. The LED light on power button will turn red when power is on, and be no color when it is off.
With 4 level LED indicator to show current battery power status. The battery can be recharging either with the bike, or, separated from bike, with the supplied AC adapter.
When the battery is unlocked, it can be taken out easily from the battery cover. With the key lock to lock up the battery pack steadily inside the battery cover.
There are screw holes at the bottom of the battery cover for assembling. With built-in fuel gauge in the battery,battery performance and more information could be shown on the connected LCD instrument panel.
Battery information can be viewed on computer through the connection of data collector.
Sent message to eRider
QQ: 2488650140
Sent message to eRider
QQ: 503799675
Tel: 13823273345
Sent message to eRider
QQ: 1929985156
Tel: 13510091591
Sent message to eRider
QQ: 895535213
Tel: 13807421593