Rear Carrier (Plastic) 24V Battery
|Charge Voltage Limit||29.75V|
|Continuous Discharge Current||15A|
|10min Discharge Current||18A|
|5sec Discharge Current||35A|
|Size||248.50 x 147.60 x 56.60 mm|
|Operate Temp. Charge||0~45°C|
|Operate Temp. Discharge||-20~60°C|
|PCB Safety Functions||Over-charge
|3||4-Level LED indicator|
|4||Charging input jack|
- - Water-resistant, non-flammable and durable ABS plastic top cap.
- - Built-in PCB protection: preventing short circuit, over-current, over-heat, over-charge, over-discharge.
- - The internal pack is stabilized by braces: avoiding mechanical accidents caused by vibration.
|The battery is fixed to the rack by using screws.||The key lock is used to fix the battery onto the holder.|
|Battery can be removed from the case by unlocking the key lock.||Battery could be recharged either by fastening on the bike or by itself with the provided AC adapter.|
|The Four-level LED indicates current power status.||The LED (at the power on/off button of the battery) glows when power is on.|
|The 15A fuse, serves as a second protection device, can prevent the battery pack from excessive discharge.|