Rear Carrier (Aluminum) 36V Battery
|Charge Voltage Limit||42.5V|
|Continuous Discharge Current||15A|
|10min Discharge Current||18A|
|5sec Discharge Current||35A|
|Size||340.00 x 151.00 x 53.00 mm|
|Operate Temp. Charge||0~45°C|
|Operate Temp. Discharge||-20~60°C|
|PCB Safety Functions||Over-charge
|1||4-Level LED indicator|
|4||Battery contact socket|
|5||Charging input jack|
- - Water-resistant, non-flammable and durable ABS plastic top cap.
- - Built-in PCB protection: preventing short circuit, over-current, over-heat, over-charge, over-discharge.
- - The internal pack is stabilized by braces: avoiding mechanical accidents caused by vibration.
|The Four-level LED indicates current power status.||The 15A fuse, serves as a second protection device, can prevent the battery pack from excessive discharge.|
|It is easy to hold the battery with the well designed handlebar.||Battery could be recharged either by fastening on the bike or by itself with the provided AC adapter.|
|The power on/off button is set on the battery base.||Not much space is needed to install the portable battery into the rear carrier.|