Rear Carrier (Plastic) 36V Battery
KL36H92G
SPECIFICATIONS
Model No. KL36H92G
Chemistry
Voltage 36V
Normal Capacity
Rate
Configuration 10S4P
Inner Resistance ≤75mΩ
Charge Voltage Limit 42.5V
Continuous Discharge Current 15A
10min Discharge Current 18A
5sec Discharge Current 35A
Size 317.20 x 148.00 x 56.30 mm
Weight 2416g
Operate Temp. Charge 0~45°C
Operate Temp. Discharge -20~60°C
Storage Temp. -20~40°C
Cycle Life 500Times
PCB Safety Functions Over-charge
Secondary protection
Over-discharge
Over-current protection
Cell balancing
Temperature protection
Illustration
1 Key lock
2 15A Fuse
3 4-Level LED indicator
4 Charging input jack
5 Power on/off
Features
Safety Devices
  • - Water-resistant, non-flammable and durable ABS plastic top cap.
  • - Built-in PCB protection: preventing short circuit, over-current, over-heat, over-charge, over-discharge.
  • - The internal pack is stabilized by braces: avoiding mechanical accidents caused by vibration.
The 15A fuse, serves as a second protection device, can prevent the battery pack from excessive discharge. The LED (at the power on/off button of the battery) glows when power is on.
The Four-level LED indicates current power status. Battery could be recharged either by fastening on the bike or by itself with the provided AC adapter.
Battery can be removed from the case by unlocking the key lock. The key lock is used to fix the battery onto the holder.
The battery is fixed to the rack by using screws.
CONTACT US
Sent message to eRider
Vincent
QQ: 1524070738
Sent message to eRider
Rainson
QQ: 2488650140
Sent message to eRider
黄桂和
QQ: 503799675
Tel: 13823273345
Sent message to eRider
王艳红
QQ: 1929985156
Tel: 13510091591
Sent message to eRider
曾兴
QQ: 895535213
Tel: 13807421593
info@silvercentre.de